RC15W
2枚のメインプレートをシャフトでつないだプレートです。「W」はワイドモデルで、一般的な男性用モデルボードのALLFLEXホールパターンに適合します。ボードのトーションを使った積極的なライディングに向き、シャフトの本数・挿入する位置を変えることでプレートのフレックスやトーションを調整することができます。
またALCスノーボードのRシリーズ、R-Mシリーズに装着する場合、ALLFLEXホールよりも40mm内側のALCオリジナルインサートホールを使用することができます。ALLFLEXホールに装着する場合に比べて、ボードのターン弧を小さくすることが容易になります。
重量は1910g(シャフト5本装着時)。12mm×390mmのカーボンシャフト5本付属。またセンター部のスタビライザーは24-25モデルより1本が標準装備となります。
レース競技だけでなく、テクニカル、フリーライディングと幅広くご利用いただけます。
※ALCスノーボード独自のホールパターンを使用する場合は、別売の短いカーボンシャフトをご購入いただきご使用下さい(別売カーボンシャフト=1本税込2,750円。長さ310mm・350mm)。なお、長さの違うシャフトを混在してご利用いただく事はできません。
RC15W
The RC15 features ALC’s original structure, connecting lightweight front and rear plates—precision-machined for reduced weight—using carbon shafts. The sliding motion between the main plates and carbon shafts helps absorb unwanted vibrations from the snow surface.
The plate is fixed only on the outside of the ALLFLEX AGS holes, allowing flex to be adjusted by changing the number of shafts, and torsion to be tuned by altering their position. Five carbon shafts are included, with a minimum of three required for proper setup.
Using the included stabilizer enhances the responsiveness of the carbon shafts, improving stability from the early phase of the turn through the turn peak.
RC15W / 製品仕様 / Product Specifications
モデル名
Model Name
|
RC15W |
重量
Weight
|
1910g(シャフト5本装着時) (with 5 shafts installed) |
付属品
Accessories
|
カーボンシャフト5本・スタビライザー1個 (5 carbon shafts, 1 stabilizer) |
取付
Mounting insert pattern
|
Allflex AGS |